39
<System Menu>
SYSTEM MENU
System Menu functions table
[Trainer]: Starts and sets the trainer system.
[Display]: Display adjustment and auto power off setting.
[Date & Time]: Sets the date and time (system clock setting) and resets the timer.
[User Name]: User name registration and ID Pin number.
[Switch]: Toggle switch type setting (Set when the switch is replaced.)
[H/W Setting]: Hardware reverse / Stick setting / Calibration.
[Sund Volume]: Adjust the volume of: Key Operation/Error Warning/Trim&Center Click/Timer Event
[Player]: Reproduction of music le.
[Camera]: Built in 0.3 megapixel camera.
[S.BUS Servo]: S.BUS servo setting.
[Information]: Displays the program version, SD card information, and product ID.
[Range Check]
:
The output of the transmitter is lowered, for Range checking.
The System Menu sets up functions of the
transmitter, this does not set up any model data.
● When the System Menu button is touched,
the menu shown below is called up. Touch
the function button that you want to enter.
●Return to Home screen
To Next Page
Loading...
