FUTABA T18MZ FASSTest-2.4GHz - Sound

75
<Linkage Menu>
●Return to Linkage Menu
● Touch the [Sound] button in the Linkage Menu
to call the setup screen shown below.
● Touch the le button
Copy/Delete/Entry/
Rename is made.
It is the same
procedure as the
picture of the
preceding clause.
Sound
Sound recording and playback.
(Saved sound le)
[Important]
Before reading data from a PC, insert the
SD card/USB memory into the transmitter and
turn on the power. The following folders are
automatically written. When reading a file from
the PC, copy it to a holder by le type.
●BMP: Picture le ●WAV: Audio le
●WMA: Music le ●MODEL: Model data
Sounds recorded with the microphone built into
the transmitter or any audio les (.wav) can be set
to the power switch or any preset switch that you
choose.
*Only a .wav le saved in the same storage place (T18MZ,
SD card, a USB memory) as the current model can be
chosen.
*The maximum recording time from the microphone is 3
seconds. Twenty-four audio les can be saved.
*The only audio file type which can be recorded is .wav.
Only the sounds recorded with the built-in microphone or an
audio le saved from your PC to an SD card can be played
back.
Setup screens No. 3 to 24 can be individually
assigned to audio file switches, etc. The playback
les can be switched each time the same switch is
operated. This can be used when playing back the
name of maneuvers, etc.
[Sound starting]
No. 1: When transmitter power switch turned on
No. 2: When transmitter power switch turned off
No. 3~24: Switch can be set.
Voice Recording
1. Touch any REC button to call up the SOUND
RECORDER screen.
2. Touch the REC button to start recording.
(Recording time: 3 seconds)
3. Record your voice as you are facing the
transmitter’s microphone.
*Speak loudly and clearly.
4. To finish, press “CLOSE”. Also sound files
created by your PC may be played back by
assigned switches. (File types; .wav le only)
*A voice le is saved automatically to the location of the
model you are currently using. Whether in the transmitter,
SD card,or USB memory. A le name is displayed on the
le button corresponding to a recording button.