FUTABA T18MZ FASSTest-2.4GHz - Page 76

76
<Linkage Menu>
85%
Sound Model1
No Switch Mode
Start up
Power off
2
3
4
5
6
File Rec
1
No Switch Mode
8
9
10
11
12
File Rec
7
1/2
SG
Assignment of audio les to switches
*Audio les can be saved beforehand.
1. Touch the le button of the No. you want to
set. A list of the les stored is displayed.
2. Select the audio le you want to play back
from the list of audio les.
*Since the audio files are played back when the audio file
names in the list are touched, the file contents can be
checked before assignment.
3. Touch the [File] button to assign the les.
4. (Switches are also selected for No. 3~24.)
Touch the [NULL] button to call the Switch select
screen.
5. Select the switch and its ON direction at the
Sequentially playing back registered le each
time operated by 1 switch
This is used when calling the order of
maneuvers, etc.
[Setting method]
1. After selecting the switch, press the [→]
button. The button display thereafter is
switched as shown in the screen above.
2. Assign the audio les in the order in which
you want to play them back.
The audio les are played back each time the
switch selected by the above setting is turned on.
Switch select screen.
(For a detailed description of the selection method,
see "Switch setting method" at the back of this
manual.)
Mode button
Playing back registered file
only once
Playing back registered file
repeatedly
Sequentially playing back
registered file each time
operated by 1 switch