20
<Before Use>
*Remove the connector by pulling up on
the lip of the slider, not the wiring.
4. Pull out the battery.
[How to install battery LT2F3500XH]
1. Insert the battery into the transmitter.
2. Insert the battery with the battery connector
facing the direction shown in the gure. (Push
the battery housing, not the battery wiring. )
3
. Arrange the battery wiring as shown in the
gure.
connector slider
Battery connector
3. Pull up on the lip of the black "connector slider"
to remove the battery connector.
To Next Page
Loading...
