FUTABA T18MZ FASSTest-2.4GHz - Page 95

95
<Linkage Menu>
Temperature Display
RPM Display
● If the temperature reaches higher than
the temperature set up here, the alarm
will operate.
● If RPM goes higher than the RPM set
here, the alarm will operate.
● Temperature Display
● RPM Display
● Display of the maximum
and minimum ranges for
temperature.
[Clear] To reset.
● It is display change
from Centigrade
[℃]
to Fahrenheit[
℉]
● Display of the maximum and
minimum ranges for RPM.
[Clear] To reset.
● Select the
type:Either
optical sensor
or magnetic
sensor. In an
optical sensor,
the number of
fins is entered.
In an magnet
sensor, the gear
ratio is entered.
● Press to setup an alarm type alert.
● Press to setup an alarm type alert.
● Press to setup vibration alerts.
4 types of vibration selections are possible.
● Press to setup vibration alerts.
4 types of vibration selections are possible.
●Return to Telemetry
●Return to Telemetry
● It is selection of the
sensor displayed on
home 2 screen.
● It is selection of the
sensor displayed on
home 2 screen.