G-Technology G Speed studio - Viewing Temperature Sensor Information

p. 38
Conguring G-SPEED Studio R
Enclosure information includes:
• Enclosure ID
• Enclosure Warning Temperature Threshold
• Controller Warning Temperature Threshold
• SEP Firmware Version
• Max Number of Controllers
• Max Number of Fans
• Max Number of Power Supply Units
• Enclosure Type
• Enclosure Critical Temperature Threshold
• Controller Critical Temperature Threshold
• Max Number of Physical Drive Slots
• Max Number of Temperature Sensors
• Max Number of Voltage Sensors
Click the X icon to close the information panel.
Viewing Temperature Sensor Information
To view the status of the temperature sensor:
1. Click the Dashboard icon, then click the Temperature link.
2. Scroll down until you see Temperature Sensors.
Temperature Sensors information includes:
• ID
• Status (Normal, Warning or Critical icon)
• Location (Controller or Backplane)
• Healthy Threshold (Enclosure Warning Temperature Threshold)
• Current Temperature
Click the X icon to close the information panel.