G-Technology G Speed studio - Changing Rebuild Settings; Migration

p. 51
Conguring G-SPEED Studio R
Changing Rebuild Settings
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Rebuild Rate drop-down menu and choose a rate:
• Low: Fewer system resources are allocated to the rebuild, leaving more
resources for data read/write operations.
• Medium: Balances system resources between the rebuild and data read/
write operations.
• High: More system resources are allocated to the rebuild and fewer for data
read/write operations.
4. Check the Enable Auto Rebuild box to enable Auto Rebuild. This will initiate a rebuild
when you swap out the failed drive with a new one.
5. Click the Conrm button.
6. Click the X icon to close the background activities panel.
Migration
The term “Migration” means that you are doing one or both of the following:
• Changing the RAID level of a logical drive
• Expanding the storage capacity of a logical drive (See Migrating a Logical Drive)