G-Technology G Speed studio - Viewing Physical Drive Statistics

p. 57
Conguring G-SPEED Studio R
 •DriveInterface – SATA 1.5, 3 Gb/s or 6 Gb/s
 •SerialNumber – Serial number of the drive
 •FirmwareVersion – Firmware version on the drive
 •ProtocolVersion – ATA/ATAPI protocol version
3. Click the Advanced Information tab.
Advanced information for physical drives includes:
• Write Cache – Enabled or disabled *
• Read Look Ahead Cache – Enabled or disabled *
• SMART Feature Set – Yes or No
• SMART Self Test – Yes or No
• SMART Error Logging – Yes or No
• Command Queuing Support – TCQ or NCQ
• Command Queuing – Enabled or disabled *
• Queue Depth – Number of commands
• Power Saving Level – Supported by this drive
• Medium Error Threshold **
• Drive Temperature
• Drive Reference Temperature
*Adjustable under Viewing Physical Drive Statistics.
**Adjustable under Changing PDM Settings.
4. Click the X icon to close the information panel.