G-Technology G Speed studio - Viewing Controller Statistics; Changing Controller Settings

p. 41
Conguring G-SPEED Studio R
Viewing Controller Statistics
To view controller statistics:
1. Click the Dashboard icon, then click the Controller link.
2. Click the Statistics tab.
Controller statistics include:
Data Transferred
Write Data Transferred
Non-Read/Write Errors
Write Errors
Non-Read/Write Requests
Write I/O Requests
Statistics Collection Date and Time
3. Click the X icon to close the information panel.
Read Data Transferred
Errors
Read Errors
I/O Requests
Read I/O Requests
Statistics Start Date and Time
Changing Controller Settings
To change controller settings:
1. From the Dashboard, select Controller.
2. Mouse-over the controller, then click the Settings button.
You may make any of the following settings changes:
• Enter, change or delete the alias in the Alias field.
SMART Log – Check the box to enable or uncheck to disable.
SMART Polling Interval – Enter a value into the field from 1 to 1440 minutes.
(1440 minutes = 24 hours) (SMART Log must be enabled to access this function).
Enable Coercion – Check the box to enable or uncheck to disable.
Coercion Method – Choose a method from the drop-down menu:
• GBTruncate