Galil DMC-1510 User Manual

DMC-1500 Appendices • 161
Accessories and Options
DMC-1510 Single Axis Controller
DMC-1520 Two-Axis Controller
DMC-1530 Three-Axis Controller
DMC-1540 Four-Axis Controller
DMC-1550 Five-Axis Controller
DMC-1560 Six-Axis Controller
DMC-1570 Seven-Axis Controller
DMC-1580 Eight-Axis Controller
-16 16 Bit ADC Option
ICM-1100* Interface board
AMP-1110 Single axis amplifier
AMP-1120 Two-axis amplifier
AMP-1130 Three-axis amplifier
AMP-1140 Four-axis amplifier
N23-54-1000 Servo motor; NEMA 23; 54 oz-in continuous
N34-150-1000 Servo motor; NEMA 34; 150 oz-in, continuous
COMM-Disk DOS and Windows (16 or 32 bit) Terminal Emulator and Software Sources
SDK-1500 DOS Servo Design Software
WSDK16 16 Bit Windows Servo Design Kit for Windows 3.1, Windows 3.11 and Windows 95
WSDK32 32 Bit Windows Servo Design Kit for Windows 95 and Windows NT
CAD-to-DMC Autocad to DMC Translator
Visual Basic
Toolkit
Visual Basic VBX and OCX Extensions

Galil DMC-1510 Specifications

General

Brand	Galil
Model	DMC-1510
Category	Controller
Language	English