Gantner MIFARE GAT ECO.Lock 7100 F/ISO - RFID Technology

GAT ECO.Lock 7xxx F/ISO
General Information
10 HB_GAT-ECOLock-7xxxFISO--EN_12 www.gantner.com
- One model for left and right-hinged locker doors and various locker materials
- Vandal-proof installation
- Optional wireless network
- Emergency power supply when the batteries become empty
2.3 RFID Technology
Identification of users by GANTNER devices within a facility is achieved via RFID (radio-frequency identification)
technology using a frequency of 13.56 MHz. Various types of RFID technologies are available with a letter(s) added
to the GANTNER model identifier to indicate the type of technology the device supports:
- "B": LEGIC
- "F": MIFARE
®
- "ISO": ISO 15693
The GAT ECO.Lock 7xxx F/ISO can operate with data carriers using MIFARE
®
and ISO 15693 technologies. It is
necessary for all devices and data carriers in a facility to use the same technology. The information in this manual is
applicable for the following RFID technologies that can be used with the GAT ECO.Lock 7xxx F/ISO.
MIFARE
®
(manufacturer NXP/Infineon)
- MIFARE
®
Classic (1k and 4k)
- DESFire EV1 and EV2
®
- MIFARE Ultralight
®
ISO 15693
- The GAT ECO.Lock 7xxx F/ISO functions with all currently known ISO 15693 data carriers.
In addition to the different RFID technologies, data carriers are available in a variety of shapes and sizes. The GAT
ECO.Lock 7xxx F/ISO is designed to operate with all different types of data carrier media.