GAT ECO.Lock 7xxx F/ISO
Technical Data
www.gantner.com
HB_GAT-ECOLock-7xxxFISO--EN_12
49
7
TECHNICAL DATA
7.1 Power Supply
Power supply: 3 x 1.5 V alkaline* batteries, type AA
*lithium batteries can also be used
GANTNER approved battery: Batterie 1.5V Alkali AA (Part No. 308819)
Battery lifetime: Up to 5 years* or 30,000 cycles with alkaline batteries at room
temperature
* depending on usage, configuration, and ambient conditions
7.2 Reading Field
Reader type: MIFARE
®
supported types:
- MIFARE
®
Classic (1k and 4k)
- MIFARE Ultralight
®
- DESFire EV1
®
and EV2
®
- ISO 15693
Note: It is recommended to have customer-specific data carriers approved by
GANTNER before use
Reading field frequency: 13.56 MHz
Reading field range: 5 to 35 mm (0.2´´ to 1.38´´)*
*depending on the installation and type of data carrier
7.3 Memory and Time Management
Data storage: EEPROM with capacity for 150 bookings, data retained during battery
change
Internal clock: Quartz-controlled, real-time clock
7.4 Control and Display Elements
Control element: Button
Display element: LED ring (multi-colored) for status indication
To Next Page
Loading...
