EasyManuals Logo

Gantner MIFARE GAT ECO.Lock 7100 F/ISO User Manual

Default Icon
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
GAT ECO.Lock 7xxx F/ISO
Operation
www.gantner.com
HB_GAT-ECOLock-7xxxFISO--EN_12
33
Locking and unlocking lockers
Close the locker door and hold it shut.
Press the button of the GAT ECO.Lock 7xxx F/ISO in using a data carrier for approximately 1 second.
o The information on the data carrier is read.
a) Valid data carriers: The LED flashes green briefly and the locking action is carried out. If the duration of use
function is enabled, the time on the data carrier is checked and the current time written onto the data
carrier.
b) Invalid data carriers: The LED flashes red briefly and the GAT ECO.Lock 7xxx F/ISO does not complete the
locking action. Possible reasons for this include:
- Another locker has already been locked using the data carrier. In this case, the first locker must be unlocked
before the data carrier can be used with the new locker.
- The duration of use period has been exceeded and the locker cannot be opened anymore. In this case,
the data carrier must be reset at a central station.
Release the locker door.
5.2.2 Free Locker Universal Mode
“Free locker universal” operating mode differs from the standard free locker mode in the following ways:
- Free locker universal mode allows the use of data carriers that are also used for other applications
- No validity date with free locker universal mode
- Not possible to use a duration of use time with free locker universal mode
- The following requirements for the data carriers apply:
1. The locker segment must be unused and "empty", i.e., coded with all zeros.
2. The Access Keys must be correct.
Locking and unlocking lockers
Close the locker door and hold it shut.
Press the button of the GAT ECO.Lock 7xxx F/ISO in using a data carrier for approximately 1 second.
o The information on the data carrier is read.
a) Valid data carriers: The LED flashes green briefly and the locking action is carried out.
b) Invalid data carriers: The LED flashes red briefly and the GAT ECO.Lock 7xxx F/ISO does not complete the
locking action.
Release the locker door.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gantner MIFARE GAT ECO.Lock 7100 F/ISO and is the answer not in the manual?

Gantner MIFARE GAT ECO.Lock 7100 F/ISO Specifications

General IconGeneral
BrandGantner
ModelMIFARE GAT ECO.Lock 7100 F/ISO
CategoryLocks
LanguageEnglish

Related product manuals