GCC Technologies EXPERT 24 LX - Page 82

Expert 24 LX User Manual
GreatCut Instruction A-4
Click the Multi-copy Icon in the GreatCut 2 toolbar and complete the Number in X/Y (the number of
copies desired on the X/Y axis) and Distance in X/Y (distance between each copy) settings then click
OK.
Note: The spacing of vertical & horizontal (Offset X & Y) should be ≥ 20mm or = 0mm; Users are
advised to set the Distance in X/Y as 0 mm to remove the space between each copy to avoid the
waste of materials.