Carriage Free Page
The Carriage Free Page allows you to set whether the laser carriage is locked or free. If the Carriage
Free setting is set to <YES>, then you will be able to manually move the laser carriage along the X
and Y axis by hand with the top door open. Whereas setting the Carriage Free to <NO> will lock the
laser carriage and movement or positioning can only be controlled via the control panel.
• Carriage Free YES / NO
Carriage Free Page
Relevant Buttons Function
/
Directional No action
/
Directional Scroll between Yes/No
Enter Saves the current setting
Menu
Go to Menu Page
A/F
Initiate the auto focus function
A/F ▲ / ▼ Directional
Manually adjust the height of the work table (Z-axis)
Start / Pause Go to Main Work page
Stop Go to Main Work page
Back Go to previous screen
Light Turn Light On/Off
Carriage / Work Table
Adjustment Page
Main Work Page
Menu Page
Press Menu
Navigating to this page:
Machine Setting Page
Select <Carriage
Free> from the
menu
Carriage Free Page
Select <Machine
Setting> from the
menu
To Next Page
Loading...
