GE Security Simon XT User Manual

Simon XT
User Manual
4
Communicating with your system
You can send commands or instruct your security system through a series of keypresses on the panel,
touchpads, or a remote telephone.
Note: The default master code is 1-2-3-4 when the security system is shipped from the factory. If your installer has changed the
length of the system codes, the default master code may also be 1-2-3, 1-2-3-4-5, or 1-2-3-4-5-6. You should change your
code after your system is installed. See Code options on page 24.
Table 2. System communication devices
Device Description
Control panel You can enter commands for your security system through simple keypresses on the panel. Depending
on how your system is programmed, you may need to enter an access code for certain commands. An
access code is a numeric code that allows authorization to operate your security system.
Two-way talking
touchpad
This touchpad controls the security system from within your home and provides voice feedback. You can
enter commands through simple keypresses on the touchpad.
Keyfob Keyfobs are handy for simple arming, disarming and light control functions. They are portable and can
be carried offsite in a purse or pocket.
Telephone You can use touchtone telephones to communicate with your system while you are offsite. Ask your
installer if you have this feature.

GE Security Simon XT Specifications

General

Brand	GE Security
Model	Simon XT
Category	Security System
Language	English