Chapter 4
Programming
31
3. Scroll up/down to the user code you want to change, then press Enter.
4. A flashing cursor is now displayed.
5. Enter a new code (use correct length), then press Enter.
6. Press Status repeatedly to exit.
Initially, all user codes are blank. You can delete a user code by pressing Disarm while changing the code.
Duress code. The duress code, when used in place of another user code, generates a silent duress alarm
which is reported to the central monitoring station.
To change the duress code:
1. Enter the System programming menu.
2. Scroll up/down to Access codes, then press Enter.
3. Scroll up/down to Duress code, then press Enter.
4. A flashing cursor is now displayed.
5. Enter a new code (use correct length), then press Enter.
6. Press Status repeatedly to exit.
Initially, the duress code is blank. You can delete the duress code by pressing Disarm while changing the
code.
Security
The Security menu contains the download enable and master code enabled programming options.
Download enable. This option determines whether your dealer can access the system remotely.
To program the download enable option, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Security, then press Enter.
3. Scroll up/down to Download enable, then press Enter.
4. The current value of this option now flashes.
5. Scroll up/down to toggle this option on/off, then press Enter.
6. Press Status repeatedly to exit.
Master code enabled programming. This option requires the master code to authorize any dealer or
installer programming when turned on.
To change the master code enabled programming, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Security, then press Enter.
3. Scroll up/down to Master code enabled programming, then press Enter. The current value of this
option flashes.
To Next Page
Loading...
Need help?
General
