EasyManuals Logo

GE Security Simon XT User Manual

GE Security Simon XT
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Simon XT
User Manual
34
Siren options
The panel has two built-in sound sources: a piezo siren and a speaker. The piezo siren makes alarm beeps and
status beeps. Fire and intrusion alarm beeps are always played at high volume, while the volume of status
beeps (such as trouble or chime beeps, entry and exit delay beeps, or auxiliary alarm beeps) is programmable.
The speaker emits the panel’s voice and also sounds beeps when a key is pressed. Its volume is also
programmable.
The siren and built-in speaker options consist of the following:
Panel piezo beeps. Panel piezo beeps (status beeps sounded on the siren). This option determines whether
or not the panel sounds nonalarm beeps.
To program piezo beeps, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Piezo beeps, then press Enter.
4. The current value of this option now flashes.
5. Scroll up/down to toggle this option on/off, then press Enter.
6. Press Status repeatedly to exit.
Panel voice. Panel voice (spoken phrases on the speaker) and keypress sounds from the speaker heard
while controlling the system. This option determines whether or not the panel speaks status messages and
arming level changes.
To program panel voice, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel voice, then press Enter.
4. The current value of this option now flashes.
5. Scroll up/down to toggle this option on/off, then press Enter.
6. Press Status repeatedly to exit.
Panel piezo alarms. Loud alarms on the siren. This option determines whether or not the panel sounds
alarm beeps.
To program panel piezo alarm, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel piezo alarm, then press Enter.
4. The current value of this option now flashes.
5. Scroll up/down to toggle this option on/off, then press Enter.
6. Press Status repeatedly to exit.

Other manuals for GE Security Simon XT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Security Simon XT and is the answer not in the manual?

GE Security Simon XT Specifications

General IconGeneral
BrandGE Security
ModelSimon XT
CategorySecurity System
LanguageEnglish

Related product manuals