GE Security Simon XT User Manual

Chapter 4
Programming
29
View event buffer
This menu item is a read-only display of the last 250 events in the system’s flash buffer. The display shows the
event number, starting at 000, and the event description on the first line. The display shows the time and date of
the event on the second line.
Use the following keys to view information not on the display:
• Silent scrolls to the left.
• Bypass scrolls to the right.
• Silent + Bypass together switches the line you are scrolling.
Scroll up to display events from latest (#000) to earliest. Press Status to exit.
System tests
This menu lets you run sensor and communication tests, and initiate a phone call from the panel to the
Enterprise Downloader. For more information, see Chapter 5 Testing on page 39.
Revision
This menu item is a read-only display of the system’s firmware version.
Contrast
To adjust the contrast of the display, do the following:
1. Scroll up/down to Contrast.
2. Press Enter.
3. Scroll up/down to increase and decrease the contrast setting. (There are eleven contrast levels.)
4. Press Status to save the setting and exit.
Note: Changes in contrast are more noticeable when not looking at the display straight on.

GE Security Simon XT Specifications

General

Brand	GE Security
Model	Simon XT
Category	Security System
Language	English