Simon XT
User Manual
28
Set date
The date displays in the format YYYY-MM-DD. To set the date, do the following:
1. Scroll up/down until the display shows Set date.
2. Press Enter.
3. Scroll up/down to set the year or enter the year using the numeric keypad.
4. Press Enter.
5. Scroll up/down to set the month or enter the month number using the numeric keypad.
6. Press Enter.
7. Scroll up/down to set the day or enter the day (with a leading zero if necessary) using the numeric
keypad. Invalid days such as February 30 will not be accepted.
8. Press Enter. The display shows the current date and stops flashing.
9. Press Status twice to exit.
Light schedules
This option lets you enable/disable time-scheduled lights. It only appears in the menus if time schedules are
programmed. Press Enter to edit, scroll to select On or Off, then press Enter again to save. Press Status to
exit.
Sensor lights
This option lets you enable/disable sensor-activated lights. It only appears in the menus if you have sensors
associated with lights. Press Enter to edit, scroll to select On or Off, then press Enter again to save. Press
Status to exit.
Chime
This option lets you enable/disable the chime feature. It only appears in the menus if you have chime sensors.
Press Enter to edit, scroll to select On or Off, then press Enter again to save. Press Status to exit.
Special chime
This option lets you enable/disable the special chime feature. It only appears in the menus if you have special
chime sensors. Press Enter to edit, scroll to select On or Off, then press Enter again to save. Press Status to
exit.
To Next Page
Loading...
Need help?
General
