GE Security Simon XT User Manual

Simon XT
User Manual
20
Alarm sirens and lamp modules
Exterior and interior sirens make three different alarm sounds on the premises, each indicating a different type
of alarm. Sirens are programmed by the installer to time out and stop sounding after a specified time.
Use Table 7 to understand the siren sounds used by the security system.
Panel indicator lights
Use Table 8 to understand the panel indicator lights.
Table 7. Alarm Siren and X10 Light Information
Function Fire Intrusion Emergency
X10 Lights Steady Flashing Steady
X10 Siren Steady Steady Alarm beeps
Interior and panel siren Temporal 3
a
a. Temporal 3 refers to a continuous pattern of three siren pulses, then off for 1.5 seconds, three siren pulses, then off for 1.5 seconds.
Steady Fast on/off
Exterior siren Temporal 3
a
Steady
Table 8. Panel indicator lights
Button or display icon When button light or display icon is on When the button flashes
Stay Doors and windows armed Doors and windows armed and no entry delay
on
Away Doors, windows, and motion sensors
armed
Doors, windows, and motion sensors armed,
and latchkey on
Disarm System disarmed System subdisarmed
Status System trouble, open sensor, or
bypassed sensor
System in alarm
Enter There are no open sensors
Chime - Solid bell Door will cause chime
Special chime - Outlined bell Motion will cause chime
Light schedules - Clock Time-activated lights feature enabled
Sensor lights - Light bulb Sensor-activated lights feature enabled
Latchkey on - Key Latchkey feature enabled
GSM (mobile) signal
bars
Three or more solid bars = signal good
Less than two solid bars = signal low

GE Security Simon XT Specifications

General

Brand	GE Security
Model	Simon XT
Category	Security System
Language	English