5.5.2 Main Menu Structure
K-## Keypad Set-up K-37 Display Text 1
K-8# Days and Date/Time
Readout F-2# Fundamental 2 E-## Digital In/Out
K-0# Keypad Basic Settings K-38 Display Text 2 K-81 Working Days F-24 Holding Time E-0# Digital Inputs
K-01 Language K-39 Display Text 3 K-82 Additional Working Days F-26 Motor Noise (Carrier Freq) E-00 Digital I/O Mode
K-02 Motor Speed Unit K-4# Keypad Buttons
K-83 Additional Non-Working
Days F-27 Motor Tone Random E-01 Terminal 18 Digital Input
K-03 Regional Settings K-40 [Hand] Button on Keypad K-89 Date and Time Readout F-3# Fundamental 3 E-02 Terminal 19 Digital Input
K-04 Operating State at Power-up K-41 [Off] Button on Keypad F-## Fundamental Pars F-37 Adv. Switching Pattern E-03 Terminal 27 Digital Input
K-05 Local Mode Unit K-42 [Auto] Button on Keypad F-0# Fundamental 0 F-38 Overmodulation E-04 Terminal 29 Digital Input
K-1# Keypad Set-up Operations K-43 [Reset] Button on Keypad F-01 Frequency Setting 1 F-4# Fundamental 4 E-05 Terminal 32 Digital Input
K-10 Active Set-up K-5# Copy/Save F-02 Operation Method F-40 Torque Limiter (Driving) E-06 Terminal 33 Digital Input
K-11 Edit Set-up K-50 Keypad Copy F-03 Max Output Frequency 1 F-41 Torque Limiter (Braking) E-1# Add Accel/Decel Ramps
K-12 This Set-up Linked to K-51 Set-up Copy F-04 Base Frequency F-43 Current Limit E-10 Accel Time 2
K-13 Readout: Linked Set-ups K-6# Password Protection F-05 Motor Rated Voltage F-5# Extended References E-11 Decel Time 2
K-14 Readout: Edit Set-ups / Channel K-60 Main Menu Password F-07 Accel Time 1 F-52 Minimum Reference E-2# Digital Outputs
K-2# Keypad Display
K-61 Access to Main Menu w/o
Password F-08 Decel Time 1 F-53 Maximum Reference E-20 Terminal 27 Digital Output
K-20 Display Line 1.1 Small K-65 Quick Menu Password F-1# Fundamental 1 F-54 Reference Function E-21 Terminal 29 Digital Output
K-21 Display Line 1.2 Small
K-66 Access to Quick Menu w/o
Password F-10 Electronic Overload F-6# References E-24 Function Relay
K-22 Display Line 1.3 Small K-7# Clock Settings F-11 Motor External Fan F-64 Preset Relative Reference E-26 On Delay, Relay
K-23 Display Line 2 Large K-70 Date and Time F-12 Motor Thermistor Input F-9# Digital Pot.Meter E-27 Off Delay, Relay
K-24 Display Line 3 Large K-71 Date Format
F-15 Motor Speed High Limit
[Hz] F-90 Step Size E-5# I/O Mode / Add On I/O
K-25 Quick Start K-72 Time Format
F-16 Motor Speed Low Limit
[Hz] F-91 Accel/Decel Time E-51 Terminal 27 Mode
K-3# Keypad Custom Readout K-74 DST/Summertime
F-17 Motor Speed High Limit
[RPM] F-92 Power Restore E-52 Terminal 29 Mode
K-30 Unit for Custom Readout K-76 DST/Summertime Start
F-18 Motor Speed Low Limit
[RPM] F-93 Maximum Limit E-53 Terminal X30/2 Digital Input
K-31 Min Value of Custom Readout K-77 DST/Summertime End F-94 Minimum Limit E-54 Terminal X30/3 Digital Input
K-32 Max Value of Custom Readout K-79 Clock Fault F-95 Accel/Decel Ramp Delay E-55 Terminal X30/4 Digital Input
Table 5.3
About Programming AF-600 FP Design and Installation Guide
5-6 DET-768A
5
To Next Page
Loading...
