ActionStep
Select Performance Test and Report... from the System menu.2
Select the test you want to run. Method notes for the selected test are shown
in the right-hand panel.
3
Note:
This dialog lists tests for all modules that can be installed in the ÄKTA pilot 600
system. Attempting to run a test for a module that is not installed will generate
an error message.
Click Run Performance Method.4
Read the Method Notes carefully, and make sure that all requirements are
met.
5
See the UNICORN Software Manual for more information regarding the
other Notes tabs for a method run.
Click Next> to continue.
ÄKTA pilot 600 User Manual 29274559 AA 123
6 Performance tests
6.2 How to run performance tests
To Next Page
Loading...
