Need help?Do you have a question about the GE Alpha RT 32551 and is the answer not in the manual?
General| Resolution | 1280 x 800 pixels |
|---|---|
| Processor | Quad-Core 1.3 GHz |
| RAM | 2GB |
| Internal Storage | 32GB |
| Display | 10.1 inches |
| Expandable Storage | MicroSD card up to 128GB |
| Camera | 5 MP rear, 2 MP front |
| Connectivity | Wi-Fi, Bluetooth |
Essential safety precautions and warnings for installation and operation.
Notice regarding the manual's availability only in English.
Specifies the minimum physical space needed for unit installation and operation.
Details the necessary electrical voltage, phase, frequency, and grounding.
Lists the essential tools required for the installation process.
Step-by-step guide for safely unpacking the delivered components.
Procedure for installing the counterweight onto the main column assembly.
Instructions for securely mounting the main column to a wall structure.
Specifies the location and size of mounting holes for the column.
Details attaching the wall mount bracket and base plate to the column.
Procedure and safety warning for lifting the heavy column assembly.
Guidance on attaching and connecting the C-arm assembly to the main unit.
Instructions for correctly connecting the power plug according to local regulations.
Verifies the correct operation of all control functions after installation.
Outlines conditions and checks required before initiating the softstart procedure.
Step to turn on the unit for the first time after installation.
Checks and adjusts the anode run voltage for proper operation.
Verifies correct preheating and mA regulation for stable exposures.
Confirms and adjusts the kV regulation for accurate radiation output.
Details checking and changing nonvolatile memory settings.
Accessing and configuring various system parameters via the service menu.
Accessing and configuring parameters like country code and filter selection.
Configuring Automatic Exposure Control (AEC) parameters.
Adjusting the C-arm brake for proper holding force and release.
Calibrating the display of the C-arm's angular position.
Fine-tuning compression force limits and speed.
Testing and verifying kV, mAs, and exposure time accuracy.
Adjusting the Automatic Exposure Control (AEC) parameters for optimal exposure.
Calibrating the system to achieve desired optical density on films.
Adjusting settings to compensate for varying breast thicknesses.
Setting density values for different exposure conditions and filters.
Reference to a diagram illustrating the system's software architecture.
To Next Page