GE Alpha RT 32551 - Unpacking the Column with the Carriage

2 Preinstallation instructions
32551-IMG rev 6 GE Healthcare 13
Crate 4 (if ECS delivered with the unit ordered):
– 770 x 640 x 460 mm (30 5/16” x 25 3/16” x 18 1/8”)
– cardboard
– gross weight approximately 20 kg (44 lb)
–ECS mechanism
Crate 5 (this will be crate 4 if ECS is not delivered with the unit):
– 460 x 320 x 370 mm (18 1/8” x 12 5/8” x 14 9/16”)
– cardboard
– gross weight approximately 8 kg (17.64 lb)
– accessories
In addition to these, one or more of the following may be received:
Crate 6 (this will be crate 5 if ECS is not delivered with the unit):
– 870 x 710 x 170 mm (34 5/16” x 28” x 6 11/16”)
– wooden
– gross weight approximately 68 kg (150 lb)
– base plate
2.10 UNPACKING THE COLUMN WITH THE CARRIAGE
– cut the packing straps
– unscrew Phillips screws
– open the fastened cover
– remove the supporting brackets by loosening the bolts outside the
crate
– remove the cardboard box including wall mount installation kit
– remove the ECS board from carriage to prevent damage when
lifting up
–the column
– remove all accessories
– remove the carriage locking bracket lift out the column and
carriage
– lay the column down with the c-arm axle against the floor. Be
careful with the cables coming out not to damage them