GE HEALTHCARE
D
IRECTION 5141177-100, REVISION 14 BRIGHTSPEED ELITE, EDGE, EXCEL: PRE-INSTALLATION
Chapter 7 - Delivery and Storage Requirements Page 123
7 – Delivery Data
Figure 7-3 Package Symbols (Storage)
Section 9.0
Extreme Temperature Transportation and Deliveries
NOTICE Failure to adhere to Extreme Temperature Transportation and Delivery requirements will
likely result in equipment damage.
Extreme temperatures should be avoided during system transportation and delivery.
Extreme temperatures consist of temperatures below -18º C (0º F), or above 49º C (120º F), without
humidity control.
When transporting the CT system, prevent extended exposure of the system to temperatures or
humidity outside of the following specifications:
• Temperature: -40º to +70º C (-40º to +158º F)
• Humidity: 5% to 95%
NOTICE Component Freezing occurs if CT system is exposed to temperatures below -18º C (0º F) for
a period longer than two days.
Allow a minimum of 12 hours for the CT system to adjust to ambient room temperature, prior
to installation.
700
To Next Page
Loading...
Need help?
General
