GE Dash 4000 Operator's Manual

1-14 Dash™ 3000/4000/5000 2000966-386D
Introduction
Power
Indicates where to press to open the writer door.
This symbol indicates that the waste of electrical and electronic equipment must not be
disposed as unsorted municipal waste and must be collected separately. Please contact an
authorized representative of the manufacturer for information concerning the
decommissioning of your equipment.
This product consists of devices that may contain mercury, which must be recycled or
disposed of in accordance with local, state, or country laws. (Within this system, the
backlight lamps in the monitor display contain mercury.)
Non-ionizing electromagnetic radiation: To indicate elevated, potentially dangerous, levels
of non-ionizing radiation. Note - In case of application in a warning sign the rules according
to ISO 3864-1 shall be adhered to.
IEC 60878 note: See safety sign ISO 7010 - W005 “Warning, non-ionizing radiation”.
This symbol indicates the date of manufacture of this device. The first four digits identify the
year and the last two digits identify the month.
Manufacturer name and address
European authorized representative
NOTE
The following symbols (required by China law only) are representative of what you
may see on your equipment.
2006-08

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available