GE Dash 4000 Operator's Manual

Equipment Overview
2000966-386D Dash™ 3000/4000/5000 2-13
Off
Press the Power key and disconnect the monitor from AC power to turn the monitor
off. When turned off, the monitor does not perform any operations.
NOTE
You cannot turn the monitor off when in COMBO or ROVER COMBO
monitoring modes. If you disconnect from AC power and press the Power key,
you are prompted to discharge the patient. The monitor receives power from the
batteries until the patient is discharged.
User Interface Overview
Main Display
The main display is the primary display. It includes all monitored parameter windows
and waveforms. It also includes monitor information and access to all other monitor
and parameter functions and menus. The monitor automatically returns to the main
display when any other menu is idle for more than five minutes.
809B
Main Display
∗
1
4
5
7
8
9
2
3
6
1 Time, date and factory or custom default name
2 Care unit and bed name

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available