GE Dash 4000 Operator's Manual

3-12 Dash™ 3000/4000/5000 2000966-386D
Monitor Setup
parameters with an asterisk may be displayed in a reduced sized parameter window in
order to accommodate 10 parameters.
The parameter priority also determines which parameters are displayed in GRAPHIC
TRENDS and ALL LIMITS menus.
You cannot select more than 10 parameters. The monitored parameters vary by
patient-monitor type. For a complete list of all parameter priority definitions by
patient-monitor type, refer to Factory Defaults on page C-1.
NOTE
If you are not actively monitoring a parameter, the parameter window is not
displayed. When you begin monitoring the parameter, the screen automatically
reconfigures to display the parameter in the defined priority and screen position.

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available