GE Digital Energy SitePro 400 VAC CESeries 7 - Load Status Screens

Modifications reserved Pagina 42/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA
Status load screen
This screen displays:
• The load level in kVA (for RPA: only this unit).
• The load level as a percentage of the nominal rated load (for RPA: only this unit).
• The source of the power supplied to the load.
LOAD ON UPS
Load = 48.00kVA
Percentage = 80%
LOAD ON INVERTER
metering
alarms
parameters
+
–
ok
Load on phases screen 1
This screen displays for each phase:
• The output phase voltage and current as RMS values (for RPA: total value of Parallel System).
• The output load as percent (for RPA: respect to the rated power of Parallel System).
LOAD ON PHASES
U1=230V I= 72A 80%
U2=230V I= 45A 50%
U3=230V I= 75A 80%
metering
alarms
parameters
+
–
ok
Load on phases screen 2
This screen displays for each phase:
• The load active power (kW) (for RPA: total value of Parallel System).
• The load apparent power (kVA) (for RPA: total value of Parallel System).
LOAD ON PHASES
L1= 14.40kW 16.00kVA
L2= 9.00kW 10.00kVA
L3= 14.40kW 16.00kVA
metering
alarms
parameters
+
–
ok