Modifications reserved Pagina 70/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA
This symbol refers to the operations of a parallel system.
These steps are not applicable for single units.
8.2 SHUT DOWN PROCEDURES
Different procedures can be followed to turn Off the UPS parallel system:
• Complete Shut Down SitePro single and parallel UPS system.
The UPS system and the critical load have to be completely powered down.
• Maintenance Shut Down SitePro single and parallel UPS system.
The UPS system has to be turned OFF, while providing the load power by mains through
the maintenance bypass switches Q2.
• Shut down of a single unit SitePro in a parallel system.
One unit of the redundant parallel system has to be turned OFF, while the load is shared
between the other units of the parallel system.
To Next Page
Loading...
