Modifications reserved Pagina 81/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA
10 OPTIONS
10.1 COMMUNICATION OPTIONS
Advanced SNMP Card
Simple Network Management Protocol
The Advanced SNMP Card is an interface to the Ethernet
Network, and provides UPS information via the standard
SNMP Protocol (UPS-MIB (RFC-1628); GE Single MIB; GE
Parallel MIB).
The UPS can therefore be managed by a Network
Management System (NMS) or by our applications (for
instance JUMP), which uses this information to determine
the state of the UPS in order to guarantee safe and orderly
shutdown of the server, when needed.
IRIS Service
Internet Remote Information System
Internet Remote Information System for UPS System
JUMP Software Suite
Java Universal Management Protocol
Software application for the control and monitoring of the UPS.
Mute Tes t
SGT5000_OPT_RMS_01
Stop
Alarm
g
GE Digital Energy
Remote Signalling Box (RSB)
Equipped with mimic diagram, general alarm, stop operation, alarm reset and
lamp.
10.2 BUILT IN UPS OPTIONS
RPA Kit
Redundant Parallel Architecture
Up to 8 units parallelable for redundancy or capacity in RPA configuration
Auxiliary Power Supply (APS) 24 VDC / 1A
To Next Page
Loading...
