GE Digital Energy SitePro 400 VAC CESeries 7 - Alarms Mode

Modifications reserved Pagina 44/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA
7.2 ALARMS
The Alarms mode is entered any time the alarms button is pressed.
The LCD will display a series of screens corresponding to the last 256 events, one event per screen.
The buttons perform the following functions:
metering abandons Alarms mode and enters Metering mode.
alarms next screen.
parameters abandons the Alarms mode and enters the Parameters mode.
+ scrolls forward to the next screen.
– scrolls backward to the previous screen.
ok display the main screen for this mode.
The events displayed are the standard GE events as described in the Section 7.7 - EVENTS (Alarms &
Messages).
The information displayed includes:
• The exact date and time when the event occurred.
• The number of the event, 255 being the most recent event, and 0 the oldest.
• The standard GE code for the event and the machine status word.
• An explicit text description of the event.
01.03.2005 22:11:51
NR=256 Status=4A61
4115: LOW BATTERY
VOLTAGE
metering
alarms
parameters
+
–
ok
The initial screen of this mode is the one showing the most recent event.