Modifications reserved Pagina 45/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA
7.3 PARAMETERS
The Parameters mode is entered any time the parameters button is pressed.
The LCD will display a series of screens containing the user parameters, accessible without password
protection.
The buttons perform the following functions:
metering abandon Parameters mode and enter Metering mode.
alarms abandon Parameters mode and enter Alarms mode.
parameters scroll forward to the next screen.
+ scroll forward to the next screen.
– select from the current screen the parameter to edit.
ok start the editing for the currently selected parameter.
NOTE !
During parameters mode it is not possible to scroll back.
Example of operation within parameters mode:
Purpose: to correct a wrong telephone number previously stored in Tel2.
1 – Entering parameters mode (parameters). The first screen is displayed.
DATE AND TIME
D M Y
Date: 01
.03.2005
Time: 12:45:07
metering
1
alarms
parameters
+
–
ok
2 – Scroll to the next screen (+). The second screen is displayed.
PROTOCOL SETUP
Modem enabled=N
Init=BEQV1X3&D0S0=2
Alarm= N Delay=22s
metering
2
alarms
parameters
+
–
ok
To Next Page
Loading...
