Modifications reserved Pagina 54/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA
Example 2:
SEM STOP before SEM START.
SEM START 18:00, SEM STOP 06:00 for weekday d4 - Tuesday.
Means that on d4 - Tuesday the SEM mode is active between 00:00 and 06:00 and between 18:00 and
23:59.
Weekday
d1 - Saturday d2 - Sunday d3 - Monday d4 - Tuesday d5 - Wednesday d6 - Thursday d7 - Friday
SEM START 00:00 00:00 00:00 18:00 00:00 00:00 00:00
SEM STOP 23:59 23:59 23:59 06:00 23:59 23:59 23:59
Example 3:
SEM mode during the night and week-end.
If the SEM mode must be enabled all nights (d3 - Monday ÷ d7 - Friday) between 18:00 in the evening
and 06:00 of the following morning and during all Saturday (d1) and Sunday (d2), the corresponding
parameters are:
Weekday
d1 - Saturday d2 - Sunday d3 - Monday d4 - Tuesday d5 - Wednesday d6 - Thursday d7 - Friday
SEM START 00:00 00:00 18:00 18:00 18:00 18:00 18:00
SEM STOP 23:59 23:59 06:00 06:00 06:00 06:00 06:00
Example 4:
If the SEM mode must be enabled on Monday (d3) and Tuesday (d4) between 18:00 in the evening and
06:00 of the following morning, on Friday (d7) between 12:00 and 13:00, during all Saturday (d1) and on
Sunday (d2) until 20:00, the corresponding parameters are.
Weekday d1 - Saturday d2 - Sunday d3 - Monday d4 - Tuesday d5 - Wednesday d6 - Thursday d7 - Friday
SEM START 00:00 00:00 18:00 18:00 00:00 00:00 12:00
SEM STOP 23:59 20:00 23:59 06:00 06:00 00:00 13:00
ECM START
ECM STOP
In dark colour are displayed the times with SEM mode operation.
The arrows indicate the conditions given by the SEM START and SEM STOP times introduced with the
parameters.
Note that on day d6 - Thursday the interval has length 0 (zero), therefore the SEM mode is not enabled
on this day.
To Next Page
Loading...
