Clearing Data 5-3
March 2008
Deleting Log Files Use the LOG submenu to clear log files from the Model DF868’s
memory. Press the appropriate side of the
[SCREEN] key to activate the
desired pane of the data display screen, and complete the following
steps:
1. To access the Clear Menu, press the
[CLR] key.
a. If you have activated the security feature (see Chapter 1,
Programming Site Data, page 1-63 for details), enter the
assigned password and press
[ENT].
2. Press
[F3] = LOG.
3. At the Name prompt, the option bar shows the names of all log
files currently stored in memory. Use the [←], [→] and
[F1]-[F4]
keys to select a site file for deletion. To leave the
LOG submenu,
press the
[EXIT] key.
4. Press
[F1] to abort the procedure or press [F2] to Clear the specified
log file. If any log files remain in memory, the
Name prompt
repeats.
When all of the stored log files have been cleared or the
[EXIT] key has
been pressed at the
NAME prompt, the programming sequence
resumes at this point.
Procedure Options Do one of the following:
• Press [F1]-[F3] to enter one of the submenus.
• Press the [EXIT] key to return to the data measurement display.
To Next Page
Loading...
Need help?
General
