March 2008
1-66 Programming Site Data
Recalling Site Data Any site file currently stored in the Model DF868’s non-volatile
memory may be recalled at any time. Up to ten site file names,
consisting of up to five characters each, may be stored at any given
time.
1. To enter the
RECLL menu, press [→] and [F1] at the initial User
Program
screen.
2. To select and recall an existing site file, use the [←], [→] and
[F1]-
[F4]
keys.
Note: The option bar shows only as many choices as there are
existing site files. The files are listed in chronological order by
creation date.
Upon recall, the selected site file becomes active and all of its
programmed parameters become current.
IMPORTANT: The
CLOCK and I/O data is not recalled with the site
file, while the
SYSTM and COMM data is recalled with
the site file.
To leave the
User Program, press [EXIT].
To Next Page
Loading...
