7
Maintenance Precautions After Using
• Wipe the video camera with a clean, dry , lint free cloth.
• When the Micro
ġSD cover or interface cover is opened, after underwater use,
there may be water drops on the inside of the Micro SD cover or interface
cover.
• After using the video camera in the water or near sand, mud or other foreign
materials, please rinse it with clean water (don’t open the Micro SD card cover
or interface cover when cleaning). After cleaning, wipe out the video camera
with a clean, dry, lint free cloth.
• To help ensure the camera's waterproof ability, wipe off any dust, sand or
other foreign material from the rubber gaskets and corresponding interface
areas.
• Don’t use any chemical solvents or agents to clean the camera. Do not use
silicone conditioners on the rubber.
Damaged rubber, waterproof gaskets with cracks or scratches will allow
water or other elements to penetrate the camera. Contact customer service
for assistance with replacment of parts or the video camera itself.
To Next Page
Loading...
