108 PMCS Interface Toolkit
Command Tab
The MDP Tabular Data Screen wizard has three command buttons:
Tab Button Function
Command Open Breaker Opens the breaker.
Close Breaker Closes the breaker.
Reset Fault Clears the event table in the MDP
Table 18. MDP Tabular data screen commands.
The MDP Command Screen shows 3 buttons:
• Open Breaker: Opens the Breaker
• Close Breaker: Closes the Breaker
• Reset Fault: Clears the Event Table in the MDP
The screen also shows the Breaker Status, for example OPEN.
To Next Page