EasyManua.ls Logo

GE EPM 7300 - Page 246

GE EPM 7300
304 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
238 PMCS Interface Toolkit
Limit 1 Limit 1 value for the Associated quantity (For example: Phase A Amps)
Trigger - Relay 1 LED display in Amber color : Limit 1 of the associated value will trigger Relay 1.
LED display in Gray color: Limit 1 of the associated value will not trigger Relay 1.
Trigger - Relay 2 LED display in Amber color : Limit 1 of the associated value will trigger Relay 2.
LED display in Gray color: Limit 1 of the associated value will not trigger Relay 2.
Limit 2 Limit 2 value for the Associated quantity (For example: Phase A Amps)
Trigger - Relay 1 LED display in Amber color : Limit 2 of the associated value will trigger Relay 1.
LED display in Gray color: Limit 2 of the associated value will not trigger Relay 1.
Trigger - Relay 2 LED display in Amber color : Limit 2 of the associated value will trigger Relay 2.
LED display in Gray color: Limit 2 of the associated value will not trigger Relay 2.
Set Above/Below Limit 1 LED display in RED color : Limit 1 of the associated value is Set for Above.
LED display in Gray color: Limit 1 of the associated value is Set for Below.
Set Above/Below Limit 2 LED display in RED color : Limit 2 of the associated value is Set for Above.
LED display in Gray color: Limit 2 of the associated value is Set for Below.
Exceeded Limit 1 LED display in GREEN color : The associated quantity is exceeded the Limit 1 value.
LED display in Gray color: The associated quantity is NOT exceeded the Limit 1 value.
Exceeded Limit 2 LED display in GREEN color : The associated quantity is exceeded the Limit 2 value.
LED display in Gray color: The associated quantity is NOT exceeded the Limit 2 value.
Example 1 Example 2
Limit1 is Set for Above Limit 2 is Set for Below
Limit 1 is 100 Amps Limit 2 is 80 Amps
The associated Quantity is Phase A Instantaneous value is
397 Amps
The associated Quantity is Phase A Instantaneous value is
50 Amps
Exceeded Limit 1 will show in GREEN color as 397>100 Exceeded Limit 1 will show in GREEN color as 50<80
Current
• Phase A
• Phase B
• Phase C
• Neutral
Voltage
• AN
• BN
• CN
• AB
• BC
• CA
Power
• VA
• VAR
• WATT
• PF
• Frequency

Table of Contents