250 PMCS Interface Toolkit
Trigger - Relay 3 LED display in Amber color : Limit 1 of the associated value will trigger Relay 3.
LED display in Gray color: Limit 1 of the associated value will not trigger Relay 3.
Limit 2 Limit 2 value for the Associated quantity (For example: Phase A Amps)
Trigger - Relay 1 LED display in Amber color : Limit 2 of the associated value will trigger Relay 1.
LED display in Gray color: Limit 2 of the associated value will not trigger Relay 1.
Trigger - Relay 2 LED display in Amber color : Limit 2 of the associated value will trigger Relay 2.
LED display in Gray color: Limit 2 of the associated value will not trigger Relay 2.
Trigger - Relay 3 LED display in Amber color : Limit 2 of the associated value will trigger Relay 3.
LED display in Gray color: Limit 2 of the associated value will not trigger Relay 3.
Set Above/Below Limit 1 LED display in RED color : Limit 1 of the associated value is Set for Above.
LED display in Gray color: Limit 1 of the associated value is Set for Below.
Set Above/Below Limit 2 LED display in RED color : Limit 2 of the associated value is Set for Above.
LED display in Gray color: Limit 2 of the associated value is Set for Below.
To Next Page