73
The EMVT-C’s metering modes available with the SELECT button are as follows:
Mode Description
AMPS Current, with no label in the units area of the display. Phase shifting
in both Delta and Wye configurations.
VOLTS Voltage, displayed as line-to-line (Ph-Ph) for Delta and line-to-
neutral (Ph-N) for Wye. Phases shown as 01, 02, or 03 for Wye and
01 02, 01 03, or 02 03 for Delta.
kWh Energy; no phase shifting.
kW Real power; no phase shifting.
kVA Apparent power; no phase shifting.
Demand Power demand, displayed with steady kW symbol. Peak power
demand, displayed with blinking kW symbol. No phase shifting.
FREQ Frequency, displayed in Hz. Phase shifting in both Delta and Wye
configurations.
To Next Page