GE G User Manual

ByusingtheUSBcable,youcantransfer
thecapturedphotosandvideostoa PC.
Followthe stepsbelowto connectthe
cameratoaPC.
1.Start a computer to which ArcSoft
software has been installed.
2. Make sure both the camera and PCare
turned on.
3. Connect one end of the supplied USB
cable to the USB/AVOUT port on your
camera.
4. Connect the other end of the cable to
an available USBport on your PC.
5. Disconnect the camera once transfer is
completed.
If the USB option is set to [PC]"
Turn the camera off and disconnect the USB
cable.
If the USB option is set to [PC (PTP) ] :
Removethe camera from the system as described
below before turning the camera off and
disconnecting the USBcable.
Window XP Home Edition/XP Professional
Clickthe [Safely Remove Hardware] icon ( )
in the taskbar and select [Safely remove USB
Hess Storage Device] from the menu displayed.
'Remove Hardware

GE G Specifications

General

Brand	GE
Model	G
Category	Digital Camera
Language	English