GE Kelman DGA900 - Safety and Technical Specifications; Safety Symbols and Warnings

MA-025 – DGA 900 Operator Guide – Rev 2.0 12-Apr-19 Page 10 of 92
2 SAFETY
2.1 Symbols
The meaning of symbols used on the Kelman™ DGA 900:
Caution. Refer to the Installation Manual / Operator Guide to prevent death,
bodily injury, equipment damage or loss of data.
Electrical Hazard. Risk of electric shock.
Primary Protective Earth connection.
Hot surfaces may be present.
The meaning of symbols used in this guide:
Warning: A procedure, practice, or condition could cause death or serious
injury and/or significant equipment damage.
[Caution]: A procedure, practice, or condition could cause minor injury,
equipment damage or loss of data.
Electrical Hazard: Risk of electric shock.
Hot surfaces may be present.
2.2 Warnings
The following warnings must be observed:
WARNING: The minimum ambient temperature for installation and service
activities is −10 °C.
WARNING: If the equipment is installed or used in a manner not specified by
the manufacturer, the protection provided by the equipment may be
impaired.
WARNING: If working at height, third parties must have received appropriate
training for working at height prior to work commencing. This includes, but is