MA-025 – DGA 900 Operator Guide – Rev 2.0 12-Apr-19 Page 39 of 92
6.10.4 Firewall
To create a custom security policy, select Settings > Firewall to open the Firewall Settings
page as shown in Figure 6-37. Rules can be added, edited or deleted to create a suitable
access policy for each type of interface. These rules are used to block unused ports and
specify distinct firewall actions (accept, reject or drop) based on the IP address or port.
Figure 6-37: Firewall configuration
See Appendix A.4 for more details on firewall configuration.
To Next Page
Loading...
