MA-025 – DGA 900 Operator Guide – Rev 2.0 12-Apr-19 Page 17 of 92
Note: This guide uses screenshots from the remote Web access HMI. The images
rendered on the local HMI are similar, but some have a different layout due to the
smaller screen.
Note: This guide displays screens from an Administrator login. All user logins have a
similar look and feel, but some features are dependent on the type of user.
Note: If there are any rendering issues on the remote HMI, press Ctrl + F5 to refresh.
Note: If using Internet Explorer 11, ensure that the option for ‘Compatibility View’ is
disabled.
6.2 Connections
The remote HMI can also be accessed from a laptop via a direct physical connection to the
product. The product ships with the default IP address as shown in Figure 6-2. Use either
an Ethernet or USB cable to make the connection as shown in Figure 6-2.
Figure 6-2: Ethernet / USB HMI connection
To Next Page
Loading...
