GE Kelman DGA900 - Alarms

MA-025 – DGA 900 Operator Guide – Rev 2.0 12-Apr-19 Page 51 of 92
6.12.3 Alarms
Select TransOpto > Alarms to open the TransOpto Alarms Configuration page as shown
in Figure 6-53.
Figure 6-53: TransOpto Alarms Configuration
Click on a channel alarm icon > e.g. ‘Channel 1 High’ to configure the type of alerts as
shown in Figure 6-54.
Figure 6-54: Channel 1 High alerts