Chapter 2. Operation
36 moisture.IQ User’s Manual
[no content intended for this page]
2.7 Shutting Down the System
To shut down the moisture.IQ, complete the following steps:
1. Tap the Settings Menu button on the right side of the touch screen.
2. Tap the Shut Down button in the Service section of the touch screen.
3. At the confirmation screen shown in Figure 31 below, tap the Yes button to shut down the unit or tap
the No button to cancel the request.
4. After the message “It is now safe to shut down the unit” is displayed on the touch screen, use the
On/Off power switch at the lower left corner of the back panel to shut down the moisture.IQ.
Figure 31: Shut Down Confirmation Screen
To Next Page
Loading...
