GE Monitor UV-900 - Menu Navigation and Value Selection

3 Operation
16 Monitor UV-900 User Manual 18-1120-05 Edition AF
If a menu has sub levels, the sub menu is displayed by pressing the
OK button. Pressing the ESC button moves back one menu level.
3.2.2 Return to main menu
Pressing ESC repeatedly, alw ays returns to the main menu 2 which is the main
operating menu. Press ESC once more to return to main menu 1 , the mode
changing menu.
3.2.3 Select value
A cursor below a text or numerical value shows what is af fected by the dial. T o
increase the value turn the dial clockwise. To decrease the value turn the dial
counter clockwise.
When setting numerical v alues, the cursor moves up to the next digit if the dial
is turned quickly in one direction, to simplify entering large values. The cursor
moves back one place to the right every two seconds if the dial is not turned.
The text or numerical value displayed is accepted by pressing the OK button.
To cancel, press the ESC button.
Sub menu 3.3.1
Sub menu 3.3.2
Main menu 1
Main menu 2
Main menu 3
Main menu 4
Main menu 5
Sub menu 3.1
Sub menu 3.2
Sub menu 3.3
Sub menu 3.1.1
ESC
OK
ESC
OK
ESC
OK
Main menus Sub menus Sub menus
Main menu 1
Main menu 2
ESC
ESC ESC ESC
ESC
Parameter
Current value
New value to be set
Set Wavelength
(280 nm) 250.0