GE Monitor UV-900 - B.2 Setup menu

B Reference information
36 Monitor UV-900 User Manual 18-1120-05 Edition AF
B.2 Setup menu
Setup language
Sets the language used in the display.
1 Select main menu Setup , press OK .
2 Select sub menu Setup Language , press OK .
3 Select the desired language.
GB = British English
D = German
F = French
E = Spanish
I = Italian
Setup unit number
The unit number is the identification the UV monitor has on the UniNet-bus. It
should correspond to the number set in UNICORN for the UV monitor. The
number should be set to 0 if one UV monitor is used. If more than one UV
monitor is used, they must all have different identification numbers.
1 Select main menu Setup , press OK .
2 Select sub menu Setup Unit Numbe
r, press OK .
3 Select unit number ( 0 – 25 ).
Setup display angle
The display angle can be set to compensate for different viewing heights.
1 Select main menu Setup , press OK .
2 Select sub menu Set Display Angle , press OK .
3 Select viewing angle ( - > \ Up, - > | Mid or - > / Down).
Setup Language
(GB) GB D F E I
Setup Unit Number
(0)
Setup Display Angle
( ->I ) ->\ ->I ->/